Curb Appeal Your Home

A. Make sure the equipment used to repair your windshield is of professional quality and not a $9.00 do it yourself kit and some kid claiming high quality repairs. Quality windshield repair kits cost a thousand dollars or more. Make sure the technician doing the repairs has the skills needed and has at least one year experience in-house under supervision. The windshield repair industry requires 80% visual improvement. Most repair specialists strive for 95% plus visual improvement. The reason for this is that once a repair is attempted and not done properly the first time your stuck with that repair, as you can't do it over again! I have seen repairs where a drop of glue placed over the break, cured and called good. Someone paid for that repair that will likely fail and crack-out.

If walls/ceilings need a fresh coat of paint, break out the brushes, but try to use neutral colors - shades of off-white are best. This is because buyers often opt to repaint, anyway, and such colors are easily covered with another color. And for those buyers who may not want to front window repair repaint off-white goes with just about any decorating scheme. Rest assured, Mrs. Buyer Is contemplating such things when she tours the home, and the missus carries a lot of weight in the decision process.



The mechanic had been overly optimistic about how little time it would take. Actually the procedure required more than 20 minutes. The repair must be done carefully because a sloppy job can cause the glass to crack. The repairer should clean the surface thoroughly and wear gloves to keep skin oil off the glass. If you do not see this happening, complain and ask to have it done properly. Then primer and resin must be applied and all air must be sucked out of the blemish.

Check for irregularities. If you're at the fix auto glass or rear of the car, look along the car to see if there are small dents. These can be seen as distortions in the reflection. If the paint is not smooth in one place, then this could be a place where there has been some damage. Dents as large as a coin can be restored by a panel beater. Dents that are not thoroughly repaired are often filled with polyester resin or fibreglass paste. Tap the surface, or go along it with a magnet. Know whether the panel is made of steel, not plastic, fibreglass or aluminum. If there are places where the magnet will not adhere, then in all likelihood, the panel has been repaired. Ask the owner why the part has been repainted?

This is another biggie. One way to overcome this stumbling block is to take a contractor with you when you inspect the house. If you do this on a few houses, you will become very efficient at estimating the cost to windshield chip repair many items such as putting on a new roof, installing siding, and replacing windows and doors. You will also become familiar with costs for painting, landscaping, clean outs, new furnaces and kitchen and bath updates.

Replacement of any home asset or feature should be a matter of last resort, especially at the end of a renovation or upgrade. However in some cases it can be the difference between a guaranteed sale and thousands in profit.

Step 7 - Remove the finishing film after a 10 minute period and make sure the resin had dried completely. Scrape away any excess resin from the surface.

Leave a Reply

Your email address will not be published. Required fields are marked *